Site.Addo1920 History
Hide minor edits - Show changes to output - Cancel
20 September 2014
by -
20 September 2014
by -
Changed line 7 from:
The machine is a miniature adding machine adding by means of a rack mechanism, with 10 racks allowing a number to be input to 10 decimal places. The Conto came in three versions, with model 2 and 3 non-printing (3 being for English currency) and model 4 having a printing mechanism. Racks are moved with a stylus, the original being retained in this fine surviving example of the machine. A lower set of windows allow the input result to be checked and the final result to be read off.
to:
The machine is a miniature adding machine adding by means of a rack mechanism, with 10 racks allowing a number to be input to 10 decimal places. It came in three versions, with model 2 and 3 non-printing (3 being for English currency) and model 4 having a printing mechanism. Racks are moved with a stylus, the original being retained in this fine surviving example of the machine. A lower set of windows allow the input result to be checked and the final result to be read off.
09 March 2014
by -
Changed line 5 from:
This by now rare surviving example of the Addo adder was produced by the AB Addo (Aktiebolaget Addo) Swedish engineering company in Malmõ, founded by Hugo Agrell in 1918,[^Anthea Agrell in [[http://www.vintagecalculators.com/html/addo.html]] viewed 4 Mar 2014^] which focussed on the manufacture of office machines. The company was founded in 1918 and in 1966 was incorporated into the Facit company as a subsidiary where it continued until the early 1980s. It produced a range of calculators and data processing equipment.[^[[http://en.wikipedia.org/w/index.php?title=AB_Addo&oldid=575699742]] viewed 4 Mar 2014^]
to:
This by now rare surviving example of the Addo adder was produced by the AB Addo (Aktiebolaget Addo) Swedish engineering company in Malmö, founded by Hugo Agrell in 1918,[^Anthea Agrell in [[http://www.vintagecalculators.com/html/addo.html]] viewed 4 Mar 2014^] which focussed on the manufacture of office machines. The company was founded in 1918 and in 1966 was incorporated into the Facit company as a subsidiary where it continued until the early 1980s. It produced a range of calculators and data processing equipment.[^[[http://en.wikipedia.org/w/index.php?title=AB_Addo&oldid=575699742]] viewed 4 Mar 2014^]
09 March 2014
by -
Changed line 5 from:
This by now rare surviving example of the Addo adder was produced by the AB Addo (Aktiebolaget Addo) Swedish engineering company in Malmö, founded by Hugo Agrell in 1918,[^Anthea Agrell in [[http://www.vintagecalculators.com/html/addo.html]] viewed 4 Mar 2014^] which focussed on the manufacture of office machines. The company was founded in 1918 and in 1966 was incorporated into the Facit company as a subsidiary where it continued until the early 1980s. It produced a range of calculators and data processing equipment.[^[[http://en.wikipedia.org/w/index.php?title=AB_Addo&oldid=575699742]] viewed 4 Mar 2014^]
to:
This by now rare surviving example of the Addo adder was produced by the AB Addo (Aktiebolaget Addo) Swedish engineering company in Malmõ, founded by Hugo Agrell in 1918,[^Anthea Agrell in [[http://www.vintagecalculators.com/html/addo.html]] viewed 4 Mar 2014^] which focussed on the manufacture of office machines. The company was founded in 1918 and in 1966 was incorporated into the Facit company as a subsidiary where it continued until the early 1980s. It produced a range of calculators and data processing equipment.[^[[http://en.wikipedia.org/w/index.php?title=AB_Addo&oldid=575699742]] viewed 4 Mar 2014^]
08 March 2014
by -
Changed line 3 from:
%center% http://meta-studies.net/pmwiki/uploads/Addo.jpg
to:
%center% http://meta-studies.net/pmwiki/uploads/Addo.jpeg
08 March 2014
by -
Changed lines 3-4 from:
to:
%center% http://meta-studies.net/pmwiki/uploads/Addo.jpg
This by now rare surviving example of the Addo adder was produced by the AB Addo (Aktiebolaget Addo) Swedish engineering company in Malmö, founded by Hugo Agrell in 1918,[^Anthea Agrell in [[http://www.vintagecalculators.com/html/addo.html]] viewed 4 Mar 2014^] which focussed on the manufacture of office machines. The company was founded in 1918 and in 1966 was incorporated into the Facit company as a subsidiary where it continued until the early 1980s. It produced a range of calculators and data processing equipment.[^[[http://en.wikipedia.org/w/index.php?title=AB_Addo&oldid=575699742]] viewed 4 Mar 2014^]
This by now rare surviving example of the Addo adder was produced by the AB Addo (Aktiebolaget Addo) Swedish engineering company in Malmö, founded by Hugo Agrell in 1918,[^Anthea Agrell in [[http://www.vintagecalculators.com/html/addo.html]] viewed 4 Mar 2014^] which focussed on the manufacture of office machines. The company was founded in 1918 and in 1966 was incorporated into the Facit company as a subsidiary where it continued until the early 1980s. It produced a range of calculators and data processing equipment.[^[[http://en.wikipedia.org/w/index.php?title=AB_Addo&oldid=575699742]] viewed 4 Mar 2014^]
Changed lines 9-12 from:
The outer crank lever on the right is used to perform the accumulation by transferring the number set on the rack to the accumulation register in the windows of the lower panel. The inner crank is available to set the accumulation register back to zero. Complementary numbers are inscribed from 0 to 9 down the left and right edges of the rack mechanism to assist subtraction being performed using complementary arithmetic.[^See also Martin
[^#^]
[^#^]
to:
The outer crank lever on the right is used to perform the accumulation by transferring the number set on the rack to the accumulation register in the windows of the lower panel. The inner crank is available to set the accumulation register back to zero. Complementary numbers are inscribed from 0 to 9 down the left and right edges of the rack mechanism to assist subtraction being performed using complementary arithmetic.[^See also Ernst Martin, “Die Rechenmaschinen”, 1925, and translated into English as Ernst Martin, “The Calculating Machines”, MIT Press and The Charles Babbage Institute, USA, “History of Computing” series, 1992, p. 301-2^]
[^#^]
[^#^]
08 March 2014
by -
Added lines 1-10:
(:title Addo ~1920 mod 2 Adder, serial 2797:)
This now rare calculator was produced by the AB Addo (Aktiebolaget Addo) Swedish engineering company in Malmö which focussed on the manufacture of office machines. The company was founded in 1918 and in 1966 was incorporated into the Facit company as a subsidiary where it continued until the early 1980s. It produced a range of calculators and data processing equipment.[^[[http://en.wikipedia.org/w/index.php?title=AB_Addo&oldid=575699742]] viewed 4 Mar 2014^]
The machine is a miniature adding machine adding by means of a rack mechanism, with 10 racks allowing a number to be input to 10 decimal places. The Conto came in three versions, with model 2 and 3 non-printing (3 being for English currency) and model 4 having a printing mechanism. Racks are moved with a stylus, the original being retained in this fine surviving example of the machine. A lower set of windows allow the input result to be checked and the final result to be read off.
The outer crank lever on the right is used to perform the accumulation by transferring the number set on the rack to the accumulation register in the windows of the lower panel. The inner crank is available to set the accumulation register back to zero. Complementary numbers are inscribed from 0 to 9 down the left and right edges of the rack mechanism to assist subtraction being performed using complementary arithmetic.[^See also Martin
[^#^]
This now rare calculator was produced by the AB Addo (Aktiebolaget Addo) Swedish engineering company in Malmö which focussed on the manufacture of office machines. The company was founded in 1918 and in 1966 was incorporated into the Facit company as a subsidiary where it continued until the early 1980s. It produced a range of calculators and data processing equipment.[^[[http://en.wikipedia.org/w/index.php?title=AB_Addo&oldid=575699742]] viewed 4 Mar 2014^]
The machine is a miniature adding machine adding by means of a rack mechanism, with 10 racks allowing a number to be input to 10 decimal places. The Conto came in three versions, with model 2 and 3 non-printing (3 being for English currency) and model 4 having a printing mechanism. Racks are moved with a stylus, the original being retained in this fine surviving example of the machine. A lower set of windows allow the input result to be checked and the final result to be read off.
The outer crank lever on the right is used to perform the accumulation by transferring the number set on the rack to the accumulation register in the windows of the lower panel. The inner crank is available to set the accumulation register back to zero. Complementary numbers are inscribed from 0 to 9 down the left and right edges of the rack mechanism to assist subtraction being performed using complementary arithmetic.[^See also Martin
[^#^]